How to change time on Fieldpont FP2010 ethernet controller from NI Max?
Hi,Recently booted up an old fieldpoint setup for a test. Trying to log some temperatures on the citadel database. But the timestamp from FP is wrong and i can only set the time zone on the controller...
View ArticleLicense for cFP Hardware
When I buy a cFP 20xx hardware I need buy Labview real time engine or the license is included in the price of the controller.
View ArticleFieldPoint Server error 32800
Trying to use a FieldPoint system from an old computer with a overhauled new program.Hardware: FP-1000FP-AI-110some other modules. SoftwareLabView 2018 32 bitFieldPoint 15NI MAX 18 Current situation:I...
View ArticleSetting cFP-SG-140 excitation voltage
Hello,I'm trying to figure out how to setting the excitation voltage in the cFP-SG-140reading FP-SG-140 AND C FP-SG-140 operating instructions it seems that one feature of the module is the...
View ArticleRelay control using FP-DO 401
Hi everyone I'm relatively new to this whole NI systems and I know fieldpoint is a bit outdated at the moment. I was trying to do a test setup which operates a relay (24V) at a specific interval for a...
View ArticleClik here to view.
Problem with cfP2220 - access denied and can''t reinstall upgrade
Hi, I am not able to communicate with compact Fieldpoint cFP-2220. I am currently using labview 2014 on windows 7.I already install FieldPoint realtime 2015 and I still have problems as shown on pic...
View ArticleClik here to view.
How to wire TTL encoder to FP Quad510
So I've got power supply going to the +wire of the encoder from terminal 4(Quad510)-From the encoder to terminal 19Checking the voltage with multimeter terminal 4 to 19 or COM shows 4.99VDCBut through...
View ArticleFieldpoint and Windows10
Hello I use an old FP1000-Module. Is this Module supported by Windwos10? Which Software do I have to install? Thanks Markus
View ArticleCan I connect the RS-485 port of a FP-1000 to a computer?
Can I connect the RS-485 port of a FP-1000 to a computer rather than the RS-232 port? The manual suggests the RS-485 port of the FP-1000 is a repeater port. If this isn't the right message board...
View ArticleCan fieldpoint software log/save RTD temperature readings without labview?
Can fieldpoint software log/save RTD temperature readings without labview?
View ArticlePossible connectors for NI 9212
Hi, we try to use NI 9212 to replace our old Thermocouple devices, but the screw terminals are too long for the space we current have. And we wonder if there are more possible choices of terminals that...
View ArticlePossible connectors for NI 9212
This is not a Fieldpoint module, but a C series module. Moved to Signal Conditioning forum.
View Article16-bit Analog Output Module
I currently have a system with two cFP-AI-100 FieldPoint A/D Modules that are accompanied by a cFP-AO-210 Module. They are both 12-bit, but I’m looking to upgrade my system’s resolution with a...
View Articlepci-1710 driver
Hello,I would like to ask why I installed the driver of the PCI-1710 Advantech capture card, but I can't find the relevant controls in the Labview user library. Why?Thank you!
View Article16-bit Analog Output Module
I currently have a system with two cFP-AI-100 FieldPoint A/D Modules that are accompanied by a cFP-AO-210 Module. They are both 12-bit, but I’m looking to upgrade my system’s resolution with a...
View ArticleAutomated Test Machine
We have an automated test machine that tests high temp igniters for ohms and amps. It operates an 18 station turret, one igniter per station. Station 1 is inop and we think it is a software problem....
View ArticleFieldpoint LabWindows CVI
I have a compact field point cFP-2120. The field point is connected to the network and is approachable from NI-MAX (version 15.3). All the fieldpoint items are approachable from the Data Neighborhood...
View ArticleNI Field Point Oboslete Serial FP-1001, AI FP-AI-111 and DO FP-DO-401 modules
Has anyone found a replacement for the obsolete modules. If so, what type was used to replace them.
View Articlepic18f4550
hello,i am trying to implement FFT (fast fourier transform) using pic18f4550 for 1024 samples .....can anyone please helpme by sending the program...and is it possible to store 1024 samples and the...
View Article