what is the last version of labview to support classic FieldPoint?
what's the last version of labview to support classic FieldPoint?
View ArticleFP TC 120 Output
Hi everyone, I will be using the FP TC 120 module to measure several temperatures using thermocouples. My question is that if I use FP Read to read the output from FieldPoint IO Point In which...
View ArticleWhat's the maximum digital I/O frequency for the NI LabVIEW RIO Evaluation Kit ?
Hi! I'm trying to analyze some sort of sine signal at the frequency of about 3 MHz. Because the analysis should be very precise and fast (about 10 samples per period), I'm needing the maximum digital...
View ArticleCan't find subFieldPoint.vi in Labview2013
I have updated my computer to LabVIEW2013 and I need to move a FieldPoint application over to Windows 7. My old vi says the subFieldPoint vi are no good. OK, so where are the new ones? I updated...
View ArticlecFP IP Address changes when unplugged
HI, I have a cFP 2200 with 1 AI-110 input module, 1 AO-200 output module, and 1 RLY-423 Relay module. Every time I unplug the power to the cFP system and then plug it back in the IP address changes. I...
View ArticleFieldPoint to 9-Pin D-Connector
Hi, I'm wondering if it is possible to use the FP-AI-112 input module to read from a digital power supply that displays flow rates. The manual for the power supply states that it has 9-Pin D-connector...
View ArticleRigol DG1062
I am using . I can’t get a Labview driver for this specific function generator. I try the DG4000. I gives me a signal error and can’t figure it out. Can you please suggest me how to get the Labview...
View ArticleFiieldPoint example fails to deploy
Hardware: FP-2015Software: Labview RT 8.2.1, FieldPoint 6.0.6f Software on FP-2015:FieldPoint 6.0.6 - Feb 2010DataSocket for LabVIEW Real-Time 4.4FieldPoint Drivers 6.0.6FieldPoint VI Manager...
View ArticlecFP Module ID over Modbus
I have a cFP-1804 base with several modules installed and I'd like to be able to identify which module is in a particualr slot. I'm using Modbus to do all my configuration and data collection. Is there...
View Articleerror writing to field point
I am trying to connect Field point FP-1001 by Ni PCI-485/2 multifuction adaptor . when i start the program by Ni scope i found " ERROR WRITING TO FIELD POINT". i have checekd the pci card and its...
View ArticleClik here to view.
FieldPoint cFP-1601 and MAX5.6 configuration
Dear All, I would like to share a way to configure the cFP-1601 Ethernet using the MAX 5.6 that doesn't anymore supports this device. The solution is an workaround on the compatibility problem for MAX...
View Articlecfp-ctr-500
Hi, I have recently upgraded a system from fieldpoint modules to compact fieldpoint.I have a cfp-ctr-500 module which I use to generate a pulse output, a terminal count attribute is used to program the...
View ArticleHow to read USER1 DIP-switch status of a cRIO chassis from FPGA?
How can I read the status of the DIP switches on a cRio chassis from the FPGA? I am working with a cRIO 9022.. My idea is to set the system into a "service" mode by setting the USER1 switch to ON and...
View ArticleClik here to view.
R.I.P. Compact FieldPoint
I knew our favourite automation controller, the cFP-2220, is set to be unavailable from 2016, but for some reason I still expected it to be programmable in LabVIEW 2014. As far as I can see the plug...
View Articlecfp 180x modbus
I am trying to communicate with the cfp1804 via modbus and am not receiving a response from the unit. I am able to establish a connection, but cannot receive any response from the slave. I am...
View Articlefieldpoint fp-2210 serial
I have a Compact Fieldpoint cPF-2210. On the base unit there are two RS-232 ports available. Is it possible to communicate to an external device over RS-232 with these ports? I installed NI-VISA Server...
View Articlecfp2200 backplane Question
I have a CFP-2200 which is configured with a CFP-AI-112 and CFP-CB-1 in the first 2 slots on the backplane next to the CFP-2200 CPU module. There are a couple of broken pins on the backplane connector...
View Articleconnector block availability
Hello, I have a cFP-1808, however am missiting the connector block pictured on page 13 of the cFP-1808 Quick Start Guide. Where can I aquire or buy one? Thanks,Dan
View Articlereading cFP-2100 with python
Hello,I have a NI cFP-2100 with ethernet connection, and I would like to read its measurementsfrom a python program. Is there a way to do this ? Thanks in advance, Stefano
View Articlefalla de comunicación serial con ejecutable
hola. tengo un ejecutable que mide 4 sensores de presion , su comunicacion es serial. el problema que tengo es que el ejecutable no responde igual si lo cargo en otro cpu, no lee los sensores, me dice...
View Article