fieldpoint doesn't work with deployed executable
I have a LabView vi that communicates to a cFP device (cFP-180x) via serial (USB to serial converter actually). The development vi works just fine (communicates with cFP), however, when I create an...
View ArticleClik here to view.
How to calibrate FP-TC-120
Hello, Now, I am using FP-TC-120 and FP1000 to read temperature using the labview. However, i don't know how to change the value recieve from the FP-TC-120 to a precise temperature. Do I need a...
View ArticleHow to connect FP 1000 and FP 1601 using SRM6100
Hi all, In my uni lab, I have two system. The first one comes with : FP1000, FP-DO, FP-TC-120 and SRM 6100. The second one goes with : FP1601, SRM6100 and Laptop. Therefore, I want to get the value...
View ArticleFP 2015 and SRM 6100
Hello all, In my lab, I have 2 SRM 6100 modem (one is a Master and one is a Remote) and 1 FP 2015, 1 FP DO 400. I have connected SRM6100 Master with Laptop ; SRM 6100 Remote with FP 2015, FP DO 400. I...
View ArticleField Point device marked as invalid in LabVIEW project
I recently ran into an issue I have not been able to solve. I was working on a client's existing system that uses a Field Point system. All was working fine until a LabVIEW crash. The application is...
View ArticleHow to configure a compact Fielpoint to time server IP (LabVIEW 2013,...
Hi all,in old MAX versions there was a field, where one can type a time server computer's IP number to synchronize a Fieldpoint controller. How I can perform that in new environment? I can't find it...
View ArticleFieldPoint linear coefficients configuration
Sorry - cross posted on LabVIEW. LabVIEW 2009 SP1 Pro, FieldPoint 6.0.9, MAX 5.0: FieldPoint: Is there a way to programmatically access (configure and read) the linear coefficients found on the Scales...
View Articleusing FPTC120 with signalexpress
HiWe have a new national instruments setup hardware and software in our lab, but we now have a requirement for the old FieldPoint FP-TC-120 modules. I am looking into using these old modules for a test...
View ArticleCompact FieldPoint and Shared Variables
Hi Real-Time community, let me first to describe my problem: I have a project running perfectly on Windows XP machine. The Real-Time Target (compact FieldPoint) is acquiring a data from different...
View ArticleWill FieldPoint Controllers work with the latest version of LabView?
I will be upgrading the current LabView that I have on my system to the latest version. The FieldPoint controllers that I am using are FP-1601, FP-AI-112, FP-AO-210, FP-DO-401, FP-TC-120. If these...
View ArticleUnclear watchdog functionality
Field point controller FP-2015NI Max 5.5Windows 7 host with Labview 2012FP <-> Labview host connection: Ethernet I would like remote FP system to go into watchdog configuration if host PC or...
View ArticleWill FIeldPoint Controllers FP-AI-112, FP-AO-210, FP-DO-401, FP-TC-120 work...
All of these products are obsolete, so I would like to confirm if I upgrade Labview to the latest version then would these controllers work with it?
View Articlepic18f4550
hello,i am trying to implement FFT (fast fourier transform) using pic18f4550 for 1024 samples .....can anyone please helpme by sending the program...and is it possible to store 1024 samples and the...
View ArticleWhere can I find Fieldpoint 6.1
I recently upgraded to LabView 2013 and, since then, I can no longer get my software to communicate with my FieldPoint hardware. I am using FieldPoint driver version 6.0.11. I've been poking around...
View ArticleFI-AO-200 and FI_AI-110
Hi, I have an alicat mass flow controller (MCR). I need to wire for both input and output signal. I have an FI-AI-110 to read in 0-5 V signal and an FI-AO-200 to sent out 4-20mA signal. The alicat...
View ArticlecFP-PWM-520 ch0 was working then stop can not get any PWM signal
I was using the cFP-PWM-520 to control a H-Bridge(with higher current capability). I was getting eraric output of the H-Bridge, while checking I found the +24VDC input into H-Bridge loose an proceded...
View ArticleFP1601 connectivity issue, error message: 33162
Hi, I am currently having problem connecting to my FP1601 ethernet interface from the host computer. Here is a little bit of background: There were two ethernet cards on my host computer and the cross...
View ArticleWhat is the function of the FP Write VI?
Hello, I'm currently a beginner getting familiar with LabVIEW. I'm trying to learn to utilize FieldPoint hardware and I came across the FP Write VI. I'm wondering what exactly is the function of this...
View Article