Cannot Detect cFP-2110 in MAX 4.6.2f1
Hi everyone. I am having trouble detecting my Fieldpoint module cFP-2110 in MAX in order to perform initial configuration and assign it a staic IP address. I am using a relatively old computer running...
View ArticleFP-TC-120
Hello All. I have FP-TC-120 thermocouples input module + FP1601 network interface. It had been work perfect. Tonight was electrical supply failure and now it looks broken :- on the panel of FP1601...
View Articlesync=true switch in fieldpoint address
I am working on software written by an ex employee, and have run across a string connected to the connection in terminal of a datasocket write function addressing a cFP-1808 DO module that I have not...
View Articlecomment avoir la liste des cFP1808 présent sur le réseau
bonjour j'ai un programme qui récupère des mesures sur differents fieldpoint cFP1808 ou 1804.Si un de ces cFP1808 est éteind, le programme est très fortement ralentit ce qui est genant pour son...
View ArticleCFP-2220 USB access in Labview
I have a LabVIEW program (Labview 2012) running deployed on a CFP-2220 (Field Point version 6.0.11). The program creates a log file that is saved to a USB drive connected to the CFP. I was wondering if...
View ArticleFP VI Read will not because of error 32812
I have a FP-1000 with 6 modules.Curently I am using Max 3.1, Test Stand 2.0 with LabView 6.1 and works OK but the computer is old and allready crashed once. I need to up-date the software to LabView...
View ArticleNI 9205 ANALOG INPUT MODULE
I NEED TO HAVE 10 DIFFERENTIAL AND 8 SINGLE ENDED INPUTS, CAN I USE A NI 9205 IN A MIXED MODE OR DO I HAVE TO USE TWO SEPARATE INPUT MODULES?
View ArticleFieldPoint IO Point selector handling new IAK file
According tohttp://digital.ni.com/public.nsf/allkb/F1362AF9CB23BD16862574420066F426?OpenDocumentand my experience, it is not easy and dynamic to expand your FieldPoint hardware, update theIAK-file and...
View ArticlecFP vs cRIO Scan Mode
During 2011 I made a comparison between using Compact FieldPoint hardware and cRIO hardware in LabVIEW. Please note that I am only talking about cRIO Scan Mode here, not Real-Time use or FPGA...
View ArticleClik here to view.
FieldPointOPC2.exe Driver & Communication Loss
Background/Environment: Currently I have a legacy hardware system utilizing older FieldPoint FP-1600 ethernet modules with a couple of Discrete Input & Output modules. I run a custom desktop...
View ArticleHow to measure a pulse width and it location as the unit is moving
I need to measure a pulse width an its location as the unit is traveling. My unit travels 1.05" on 1.5 sec or .47 in/sec. At 12.5 Vdc the pulse is about .100 inch in width by design we know were the...
View ArticlecFP-2100 Comm failure with Status light solid
I have a cFP-2100 with cFP-TC-120, cFP-AI-110, cFP-AO-210, cFP-DIO-550, and a cFP-CB-1 per I/O module. My labview program complained that it couldn't find this module, but it could see 2 other...
View ArticlecFP-Quad-510 is slow to update
Hi: I think I may allready know the answer to this question, so here it goes. I am using cFP-2220 with AI-112 (3S/s), AO-210 (200S/s), DI-301 (1KS/s), DO-401 (20KS/s), Quad-510 (1MHz), SG-140...
View ArticlecFP-DIO-550
I have the following hardware and software. - cFP-2220- cFP-DIO-550- LabView 8.6 I'm using the digital output vi from the example of LabView 8.6. This exampel vi works with the cFP-DIO-550. However,...
View ArticleUnable to detect cFP in MAX
Hi, We have cFP 2020 module along with AIO 600. We installed LabVIEW 8 when we brought the product. Now since the version of LabVIEW is very old we downloaded the evaluation version of LabVIEW 2011...
View Articleaccesso a porta seriale con labview, scientific linux e interfaccia usb-rs232
Ho un pc con SLC5, con interfaccia USB-RS232 e sto cercando di parlare con fieldpoint. Visaconf vede correttamente 4 interfacce (/dev/ttyUSB0, 1, 2, 3), mappate su ASRL1::INSTR .. ASRL4::INSTR.Se provo...
View ArticleUsing fieldpoint with scientific linux and USB-RS232 interface
I am using a desktop PC with SLC5 and an USB-RS232 interface. I need to program a fieldpoint FP1000 module within labView. Visaconf is correctly seeing the interfaces (4 ports: /dev/ttyUSB0 .. 3,...
View ArticleFieldpoint faulty ethernet port
We have a compact fieldpoint that recently stopped communicating. Accoring to the PC, ethernet port 0 is totally non-funcional as it sees the network cable as unplugged. Port two appears to work but...
View ArticleClik here to view.
How do you download a higher version of Labview real time into cFP-2200 when...
I can not seem to figure out what I need. My cFP-2200 has a version of Labview RT 8.5.1 and fieldpoint 6.0.1.I need to have at least Labview RT 10.0 and fieldpoint 6.0.7 because I am doing Ethernet IP....
View ArticlecFP-2220 not accessing USB
Hi all, I am trying to check if my VI is properly reading/writing a config text from a USB drive plugged into a cFP-2220. Currently, I have the cFP connected to my computer via ethernet cord, and I am...
View Article